Outside panels are 8’ high x 12’ wide and inside panels are 7’6” high x 12’ wide. Entrance gate for outside fence is 102” wide x 8’ tall.
This fence system is constructed using a 4’ high x 12’ long high density Puck board for the bottom portion of each panel. The upper portion is uses 1/4” steel wire mesh with a 2” square spacing of the mesh. The entire frame is welded to size then rolled so that each panel is curved. Each panel is then hot dipped galvanized for superior rust protection.

Includes: Assembly bolts, Outside swinging entrance gate, Inside swinging gate.